Accessories and fixtures

Compact and very lightweight extensometer for direct strain measurement on sensitive material samples.

Protective case with foam insert for FMI-S10/20/30 series gauges.

Digital force gauge carrying case with foam insert for FMI-B series gauges.

Compression rod D=1.7mm L=290mm, with thread M2x3 mm on both sides, screwed on hexagonal nut and protective cap D=4mm L=12.2m

The drag ring D=12mm is suitable for mechanical force gauges from 3 N to 25 N.

The drag ring D=32mm is suitable for mechanical force gauges from 50 N to 500N.

Compression plate with flat surface, diameter 30 to 100 mm, inner thread for mounting at force tranducer or teststand base pl

Protective case for force gauges series FMI.

The force gauges of the FMI-S and FMI-B series have two holes with M10 internal threads on each side of the robust aluminium

T-handle for FMI-S- w=70 mm, M10 threat.

Jacobs chuck grips are utilized for tensile and compression tests to secure round or multi-edge specimen.

Adapter for centric installation of a force gauge of the FMI-B/S series in a standard press with D10 punch holder.

Touchscreen controller for our FMT-313/-311/-310 series of universal testing machines (UTMs).

Measuring devices of the Q-Force series are compact and robust force transducers for Alluris testing machines.

Pendulum-mounted draw hook for sealing caps and reclosable hinged caps made of plastic. 

Pendulum-mounted tension hook for knobs up to 30mm diameter.

The surface finish and the appropriate mix of materials ensure that the specimen is held securely in the tensile testing mach

Screw grips are used for tensile tests of different materials.

The surface finish and the suitable material mix ensure that the specimen is held securely in the tensile testing machine.

Screw grips are mainly used for material and material testing (tensile testing).

Screw grips are used for tensile tests of different materials.

The object support plate is used to hold standard foam samples to determine the deformation behaviour.

The standard specimens are used to determine the deformation behaviour of foam mouldings and foam standard specimens.

Slides for bending tests and fracture tests with adjustable support distance.

Hardened steel thrust piece for standard 3-point bending tests.

Compression device for standardised 4-point bending tests consisting of a support rail and 2 compression fins whose distance

Calibration set to capture with the highest reproducibility the correction factor of the length measuring system for universa

Internal circuit board with additional external signal inputs as a supplement to the control unit FMT-310 with 2 analogue mea

For remote display of 2 digital switching outputs of the controls FMT-310CU and FMT-317CU.

Rugged plastic case with solid foam insert suitable for pull tester series FMT-W (since 2012).

For tests according to EN ISO 12625, with clamping tool D=89 with 2mm rubber surface and fasteners.

For test according EN ISO 12625 and DIN 533357, with clamping tool D=89 with 2mm rubbersurface and fasteners.

Distance adjustable with hand wheel.

Ring terminal adapter (interchangeable with center screw of the terminal adapter).

Self-centering attachment for angled (90 °) cable lugs or L-crimps.

Standard sized 3.5mm.

The device ensures that the angle remains constant at a 90° deduction.

Following DIN 53375 with 90° pulley for standard load block.

Dimensions 375 x 400mm, including 4 T-slot nuts

Adapter for attaching the FMT-923 roll grips

The force gauges of the FMI-S and FMI-B series have two holes with M10 internal threads on each side of the robust aluminum h

Adapter for clamps with internal thread (FMT-948M10) for connection to the measuring cell resp.

Neutral insert to adapt the terminal grip for your specific needs.

Assembly consisting of locking eccentric with spring-loaded pressure plate for cable clamping and rotary plate with central c

Interchangeable terminal adapter with conical reduced slots for small crimp sleeves.

Slot widths:

Rotatable end sleeve holder with slots.

Turntable with 8 pins (D = 2 | 3 | 4 | 5 | 6 | 8 | 10 | 12mm) for ring cable lugs.

Adapter for centric installation of a series FMI-B/S force gauge in a standard press with D10 punch holder.

Compression plates for testing compression springs with centered pin.

Protective device with two wide-opening wings made of transparent Plexiglas, suitable for 1-column universal and tensile test

Roller grip with two eccentrically mounted, self-closing pyramid rollers for tensile testing and peel tests of welded cables.

Roller grips with 2 eccentrically mounted, self-closing pyramid rollers for tensile strength testing of welded cables.

LAN and PC interface for test stands with force gauges of the FMI-B30, FMI-B50, FMI-S30 and FMI-S30 series.

Protective carrying case with insert for SMS-300 series.

Protective carrying case with insert for SMS-400 series.

2-piece solid rubber protectors for maximum protection of the series SMS-300B strobes.

3-piece protector with hand grip made ​​of solid rubber for maximum protection of the series strobes SMS-300E.

3-foot tripod suitable for all strobes and tachometers with standard UNF threaded tripod.

Max height 150cm.