Calibration of Atorn / Hahn+Kolb force gauge 80.ATOR

Calibration of a mechanical or digital hand-held force gauge of the trade mark ATORN (Hahn+Kolb Group), traceable to PTB/DKD/ILAC standards. The detailed calibration certificate includes calculations of the measurement uncertainty, a statement of conformity for the tested measuring instrument and a calibration recommendation according to the selected calibration procedure in accordance with VDI/VDE 2624 sheet 2.1 or DKD-R 3-3 (B).

The calibration in tension and compression direction is carried out for the measuring range up to 1000N on an automated calibration test bench with staggered N-masses. The lowest resolution is 0.2N for devices with a measuring range up to 2N. Force gauges with a measuring range greater than 1000N are calibrated on a test rig with transfer standard up to 250 kN.

Which individual measuring ranges/measuring spans are covered by the accreditation can be found in the respective service articles CAL-100 or CAL-210 in the service area under Calibration laboratory for force.

• Audit-proof traceability according to IATF 16949:2016 and DIN EN ISO 9001:2015
• Calibration facility with DIN EN ISO 17025 accredited measuring range from 2 N to 250 kN
• Highest precision, low measurement uncertainty (CMC < 0.02%)